Trying to set up Nat 1-1 maybe with a secondary ip when i already have 16 and some port forwading and such ....
i currently have it setup with
fa0/0
ip address 67.xx.xx.226 255.255.255.240
secondary ip ????
no ip redirects
no ip unreachables
ip directed-broadcast
ip inspect firewall out
ip route-cache flow
no cdp enable
int s0/0/0
ip address 64.xx.xx.10 255.255.255.252
encap ppp
service-module t1 timeslots 1-24
ip route 0.0.0.0 0.0.0.0 s0/0/0
and i have this interface connecting to our switch because i need to statically assign a few PCs in my internal network to Global ips (licensing requirements Mitel) but thats taking up the ip 67.xx.xx.237 since i have 12 usable ips but if im trying to do NAtting with 1 paticular ip
but i know i cant make another interface with the same subnet....
i have 12 statics im thinking of doing a secondary ip do some type of Nat if im doing a 1 - 1 nat and outbound traffic also on 1 of the available statics..
reasoning for this i have my Mitel phone system 192.168.14.2 needing to be able to get its outbound traffic to go out to using the T1 internet traffic For sip trunking and setting asside a Full 1-1 NaT ....
Thanks ;)
Start Free Trial
